SPECIFICATIONS / FEATURES

[ CONSTRUCTION ]
Heavy duty 430 stainless steel exterior. Anodized aluminum finished bottom and back of exterior. High quality 304 series stainless steel work top and interior, ABS evaporator drain cover. Insulated with 2.5" thick high density foamed-in-place CFC free polyurethane foam. Four 4" diameter casters (front casters with brakes). Door heater installed around inside cabinet frame to prevent moisture build up.

[ REFRIGERATION SYSTEM ]
·Side-mounted condensing unit for bigger compartment use compared with back mount models.
·One compressor with two solenoid valves for dual temperature operation.
·Oversized condenser and evaporator coil cools to set temperature in a minimum time period and maintains it.
·Cool air intake via the front of the unit while warm air exhausted through the side, bottom and rear for high performance of condenser.
·Evironmentally friendly CFC free 404A refrigerant.
·Adjustable defrost cycle between every 3 and 6 hours with 400 watt heater for freezer compartment - time initiated, both temperature and time terminated for backup fail-safe, automatic evaporator fan motor delay on defrost cycle. Air defrost for refrigerator compartment - temperature initiated and terminated.
·Built-in 80 watt condensate pan heater located at the bottom of cabinet composed of anodized aluminum interior and galvanized steel exterior.
·Pressure relief port located at exterior back wall for rapid re-entry.
·One 115 volt / 60 cycle / 1 phase NEMA-5-15P plug for all undercounter dual temperature units.
·Factory preset temperature, 35℉ for refrigerator side and -4℉ for freezer side. Operation of compressor and all other electrical components is governed by digital monitoring system (PCB control box) behind side grill.

[ DOORS ]
·430 series stainless steel exterior with 304 series stainless steel interior. Insulated with 2.5" thick, foamed-in-place, CFC free polyurethane foam.
·Rounded corners for a sleek and modern appearance. Heavy duty adjustable torsion spring self closing door system.
·One piece gasket for easy replacement.
·Heavy duty door handles that stay out of the way.

[ SHELVING ]
·Two (2) epoxy coated interior shelves per section.
(Optional 304 series stainless steel shelves)
·11" pilasters and shelf clips made of 304 series stainless steel.

[ DIGITAL TEMP. MONITORING SYSTEM ]
·Easy to read digital temperature display.
·Easy to set temperature by simply pushing button on PCB control box.
·Microchip digital monitoring system (PCB control box) provided with various functions for monitoring and maintaining ideal temperatures. Temperature range From 32℉ to 41℉ for refrigerator side and -15℉ to 32℉ for freezer side.